General DTF Transfers Pressing Instructions
Prepare Your Garment
Ensure your garment or surface is clean, dry, and free of any wrinkles or debris. Pre-press the garment to release any moisture.
Set the Heat Press
Adjust the heat press to 300 degrees Fahrenheit.
Initial Press
Press for 10 seconds with high pressure (60 PSI). Adequate pressure is crucial for successfully adhering your transfers to the garment.
Cool Down
Allow the garment to cool down completely. Once cooled, carefully peel off the transfer film, starting from a corner.
Second Press
Repress for another 10 seconds to seal in your design, using a Teflon sheet on top for protection. The second press ensures your design is fully sealed.